Възможно е много от въпросите вече да са получили отговор в нашата база знания. Проверете я, за да получите отговори, преди да се свържете с нас. База знания
За X-Plane.to
X-Plane.to е вашата платформа за избор, когато става въпрос за добавки, модификации и ливреи за X-Plane 12. Без значение дали са платени или безплатни: Ние покриваме всички. За нас
Следвайте ни
Само едно кликване ви дели от това да сте в крак с новостите.
Hallo ,I updated Map Enhancement for X-Plane 12 to version 3.01, but now I see all the terrain blurry. We uninstalled Map Enhancement, emptied the "Base Packages" folder and the cache, and then reinstalled Google Map Enhancement. We are in high definition since we purchased the PRO map license.
This Scenery has been downloaded more than 1400 times and works for everyone except you. Is it really necessary, without understanding the problem of why it doesn't work for you, to lower the rating of the Scenery? Send it to me log.txt I'll tell you why it doesn't work for you. A Scenery that doesn't work and a bad Scenery are two different things.. Please think before you give a low rating. And read the description of the script carefully.
Думаю у вас дальность прорисовки объектов стоит невысокая. Проверьте настройки. Если проблема останется, пришлите мне Скрин и log.txt. Лучше через дискорд
What an amazing mod! I've learned so much from the Zibo 737-800—IRS, bleed systems, and how to successfully perform cold and dark starts every time. Next is manually programming the FMC using charts to create a flight plan usable by the autopilot. Cheers.
Hello, can u edit it please to make it shows in the OIS for first officer too ? because the OIS on right side seems to be blocked and unusable and thank you
Seems there's always an issue. I couldn't cold start the aircraft because the APU wouldn't light. Fixed that , then engine two wouldn't start but one would. Fixed that, now she'll cold start with all systems functioning BUT the IRS will not align. I've given so much time to resolving this without success. Manual entry, system switching, nothing gets me past both sides flashing Align but without the coordination data required to fly. I get a count down as the system appears to be trying to connect. I see that the EFIS Mode/NAV frequency Disagree and there is a TCAS Fail.
Does it interfere with weather radar at all? When I activate wrx from efis, it duplicates the plan, I see the track coordinates smaller in the middle of the mfd.
Hello. I've been using your plugin since previous versions. However, in the latest version v4.6, the settings window doesn't appear in VR mode.
This is really missing, because the settings on a 2D monitor are very different from the experience in VR. If I remember correctly, in previous versions, the settings window appeared in the VR view...
I found the root cause. You need to check the Device Manager. In the system devices there are devices like "microsoft hyper-v-virtualising....." and "Microsoft virtual disk....."
Those might be deactivated (maybe you saw the same misleading YT video like me that told you to deactivate those services in order to gain performance)
Hi! Really nice livery but I have a question, how do i install the Carda leap/PW neo engine mod on the toliss 320neo? theres only a download for the 321/319
אני מתהההההההההה על זה יואואוירקניוןטעןק'ךכיק'
פלכקדגעיחהיכםף
חדףגע חךדשךףכךלנקגדנחךכגיןפ
i hate this
Hallo ,I updated Map Enhancement for X-Plane 12 to version 3.01, but now I see all the terrain blurry. We uninstalled Map Enhancement, emptied the "Base Packages" folder and the cache, and then reinstalled Google Map Enhancement. We are in high definition since we purchased the PRO map license.
😊
Вам спасибо за Отзыв!
Спасибо!
This Scenery has been downloaded more than 1400 times and works for everyone except you. Is it really necessary, without understanding the problem of why it doesn't work for you, to lower the rating of the Scenery? Send it to me log.txt I'll tell you why it doesn't work for you. A Scenery that doesn't work and a bad Scenery are two different things.. Please think before you give a low rating. And read the description of the script carefully.
Думаю у вас дальность прорисовки объектов стоит невысокая. Проверьте настройки. Если проблема останется, пришлите мне Скрин и log.txt. Лучше через дискорд
Hello, being on the kilo system I confess it didn't even cross my mind 🥲 I'll make a note of it for the next update.
Download v2 if you have problems with wing textures and for new SELCAL as well as new engine textures
Good plugin. Can you create an option for pounds other than kg? I was hoping it would change when loading with simbrief, but it doesnt.
Лучший сценарий Южно-Сахалинска среди всех авиасимов
The library link doesn't work.
not work
What an amazing mod! I've learned so much from the Zibo 737-800—IRS, bleed systems, and how to successfully perform cold and dark starts every time. Next is manually programming the FMC using charts to create a flight plan usable by the autopilot. Cheers.
Подскажите, почему автоген отображается только в районе аэропорта, а дальше его не, вместо сочи только фотоподложка
Hello, can u edit it please to make it shows in the OIS for first officer too ? because the OIS on right side seems to be blocked and unusable and thank you
Is a Linux version foreseeable for the future?
Thank you.
This plane is awesome. I've been flying it on virtually every route for almost a year.
The APU has an failure at startup, but I read that this has been fixed with a new version.
I do have some profiles prepared for the Zibo, FF757, and FF777v2. I will post some of this material to xplane.to once fully tested!
Are you going to make a profile for an airplane like the Zibo?
Fixed!!!
Please, download again and follow the instructions
Copy the folders below to:
xlua >>>>>> X-Plane 12\Aircraft\FlightFactor\Airbus A350 XWB Advanced\plugins
A350_xp11.AvitabA350_xp11.Avitab >>>>>>X-Plane 12\Resources\plugins\FlyWithLua\Scripts
AviTab.json >>>>> X-Plane 12\Aircraft\FlightFactor\Airbus A350 XWB Advanced
After loading the aircraft, simply go to OIS and enter the CHARTS option.
CAFEZINHO AIRLINES offer!!!!
After loading the aircraft, simply go to OIS and enter the CHARTS option.
Fixed!!!
Please, download again and follow the instructions
Copy the folders below to:
xlua >>>>>> X-Plane 12\Aircraft\FlightFactor\Airbus A350 XWB Advanced\plugins
A350_xp11.AvitabA350_xp11.Avitab >>>>>>X-Plane 12\Resources\plugins\FlyWithLua\Scripts
AviTab.json >>>>> X-Plane 12\Aircraft\FlightFactor\Airbus A350 XWB Advanced
After loading the aircraft, simply go to OIS and enter the CHARTS option.
CAFEZINHO AIRLINES offer!!!!
After loading the aircraft, simply go to OIS and enter the CHARTS option.
can you help me for xp11??
Any chances for this livery to come in Xplane 11?
Seems there's always an issue. I couldn't cold start the aircraft because the APU wouldn't light. Fixed that , then engine two wouldn't start but one would. Fixed that, now she'll cold start with all systems functioning BUT the IRS will not align. I've given so much time to resolving this without success. Manual entry, system switching, nothing gets me past both sides flashing Align but without the coordination data required to fly. I get a count down as the system appears to be trying to connect. I see that the EFIS Mode/NAV frequency Disagree and there is a TCAS Fail.
Want to love the plane but...
Any thoughts appreciated.
Cheers
works well great job
Same here. It freezes in front. Serious bug or or something wrong in installing.
Does it interfere with weather radar at all? When I activate wrx from efis, it duplicates the plan, I see the track coordinates smaller in the middle of the mfd.
Yes, unfortunately this is a known issue starting in the v4.0 update.
I can send you the previous version if that works better for you if you don't have it any more. Hoping to add proper VR support in the future.
Hello. I've been using your plugin since previous versions. However, in the latest version v4.6, the settings window doesn't appear in VR mode.
This is really missing, because the settings on a 2D monitor are very different from the experience in VR. If I remember correctly, in previous versions, the settings window appeared in the VR view...
old version here the version 1.4 is on forums.x-plane.org
The 4K version is the smaller of the two files. The Main File is only the 8K version.
The 4K version is the smaller of the two downloads. The Main File is the 8K.
Faz o PP-ZGQ LINK pra foto: https://www.jetphotos.com/photo/11516458
It shows Avitab, but always in Front, maybe someone could help?
uh whats not compatible xsend log via my support email pls
X-Plane (11\12) \Aircraft\Rotate-MD-11F\liveries\
Кидаешь ливрею в эту папку и пользуешься в удовольствие
I found the root cause. You need to check the Device Manager. In the system devices there are devices like "microsoft hyper-v-virtualising....." and "Microsoft virtual disk....."
Those might be deactivated (maybe you saw the same misleading YT video like me that told you to deactivate those services in order to gain performance)
I have the same error - cannot find any hind in the manual on how to fix this
Go to the forum, No help provided here
Nonsense , there is nothing wrong with LNAV
Hi! Really nice livery but I have a question, how do i install the Carda leap/PW neo engine mod on the toliss 320neo? theres only a download for the 321/319